Purchase tips for partition doors-cleaning and maintenance of partition doors

Purchase tips for partition doors - Cleaning and maintenance of partition doors

Purchase tips for partition doors

Solid wood partition doors are the face of the entire home environment. As the face project of the entire living room, indoor partition doors reflect and demonstrate the taste and quality of the living owner to a certain extent. Consistent with the entire home design style, it is the basis for choosing indoor partition doors;

Pay attention to the thickness and quality of door panels and door covers: Many consumers believe that the thicker the door panels and door covers, the better, but in fact, it is not right. The sound insulation and heat insulation effect of wooden doors is related to the process and material of wooden doors. It is not that the thicker the door panels, the better the sound insulation and heat insulation effect. Solid wood composite doors adopt Natural solid wood is light in weight, and can reach 50% of the weight of pure solid wood doors of the same specifications;

Pay attention to the process and quality of partition door core panels: Currently, the solid wood composite doors in indoor partition doors are among solid wood mesh keels, filled with corrugated paper, frame-filled foam, bridge hole mechanical panels, etc., and the comprehensive ability of bridge hole mechanical panels is the best; locks, hinges and other small details will directly affect the comfort of indoor partition doors, and also affect the quality and life of indoor partition doors, especially the quality of hinges. Hinges are components that link door frames and door leafs. If their quality is not up to standard, the door leaf may fall, etc., which ultimately leads to unsmoothing in use during use, thereby affecting its service life. Cleaning and maintaining partition doors. Use soft facial wipes when staining the surface. It is easy to scratch the surface with a hard cloth. Do not directly contact the solid wood partition door with clean water.

There should not be too much friction at the second edge and corner. After friction, the edge and corners will easily get worn out, which will cause the paint to fall off.

Solid wood partition doors have a characteristic. If the ambient temperature and humidity vary greatly, slight cracks may occur at the joints. There is no need to panic. This phenomenon will naturally disappear with the changes in seasons.