Set doors are a new type of trendy decorative interior doors in modern home decoration. Compared with other interior doors, their most prominent advantage is that they generally sell door sleeves, door frames, door leaves and other components in a complete set, which also brings consumers a very convenient installation.
However, indoor suit door products are used more frequently and are easily damaged. How can consumers maintain them during use? If you can think more about your mind and master some tips on the use and maintenance of home suit doors, it can bring convenience to life and make it last longer.
1. Self-made elastic door block: The doors of the home often need to be opened and closed. When the door is opened, it often hits the wall directly. Over time, the lock box and handle on the door will easily hit the wall, damaging the wall and door, affecting the beauty. You can find a rubber block about 5 cm thick or nail a thick rubber on a small wooden block and nail it to the lower corner of the inner side of the door against the hinge side, so that the door and window will not be damaged.
2. Keep the door from being blown open by the wind: If the door in the home is easily blown open by the wind or open without opening after the door is closed, it is both inconvenient and unsafe. You can find a powerful magnet of appropriate size and buried it flat above the door frame about 1/4 of the height of the door, and then nail a piece of iron sheet to the place where the door leaf and the door frame match. After closing the door, it will suck each other to prevent the door from being blown open by the wind. This method can also be used for cupboards, wardrobes, windows, etc.
3. Anti-stick locks: After using the munition door locks for a long time, they will often become dry and fail, and it is difficult to open and close. In this case, you can drop some engine oil on both sides of the movable lock or wipe it with soap a few times. The door lock will be flexible and flexible, and it will be open and closed freely.
Set door quality and safety requirements Selection
Wooden suit doors are a new type of building decoration and decoration material with a large quantity and wide range that has emerged in recent years. In order to standardize the production and sales of wooden suit doors, the national quality and technical supervision department has issued and implemented a number of standards based on its production process and product characteristics and combined with the actual situation of various localities. The standard strictly stipulates the production technical requirements, dimension requirements, moisture content, surface bonding strength, formaldehyde emission and impact resistance of wooden suit doors. In today's pursuit of environmentally friendly decoration, technical standards are the only way to measure product quality and safety requirements, especially the moisture content, glue strength index and formaldehyde emission that relate to the quality of wooden suit doors. When choosing, consumers should look at the product execution standards and the technical parameters of the implementation standards. Only in this way can they ensure the quality and safety of the purchased products.